Boiler Service - Ideal Vogue Combi Boiler Step by Step Guide

WEBVTT
Kind: captions
Language: en

00:00:00.709
my name's Allen hats and today I'm doing
00:00:03.379 00:00:03.389 day in the life of a plumber I'm doing
00:00:06.260 00:00:06.270 them I'm doing a bottle service today so
00:00:09.140 00:00:09.150 I've got an ideal book this ideal book I
00:00:12.200 00:00:12.210 actually installed this boiler back in
00:00:15.099 00:00:15.109 2015 so I'm gonna I'm gonna drill it
00:00:18.590 00:00:18.600 down we're gonna pump the expansion
00:00:20.210 00:00:20.220 vessel oh I'm gonna do a full service
00:00:22.189 00:00:22.199 unless before that I'll show you I'll
00:00:25.370 00:00:25.380 show you the install and you can I
00:00:27.710 00:00:27.720 booked it and see what you think
00:00:28.870 00:00:28.880 so what so as I said with all this back
00:00:33.049 00:00:33.059 in August 2015 and if we have a look we
00:00:41.000 00:00:41.010 used press-fit unless the good thing
00:00:45.380 00:00:45.390 about press-fit is everything stays
00:00:47.750 00:00:47.760 clean all in fact pipes is clean we've
00:00:51.920 00:00:51.930 got a standoff kit on this boiler and
00:00:55.189 00:00:55.199 this is a vogue 26 which is perfect pop
00:01:00.020 00:01:00.030 florets in this house and then we've got
00:01:04.280 00:01:04.290 this wrong boiler oppai where it goes up
00:01:06.830 00:01:06.840 back over there nice and neat and that
00:01:09.500 00:01:09.510 I'll lugged that pipe that is the gas
00:01:11.660 00:01:11.670 pipe again with use press-fit
00:01:14.359 00:01:14.369 and with Prescott you can use it on gas
00:01:17.300 00:01:17.310 if you use you have to use the ones with
00:01:20.780 00:01:20.790 the yellow ring I'll just go outside
00:01:23.300 00:01:23.310 I'll show you I'll show you flew on this
00:01:26.300 00:01:26.310 as well we have a look at flow charts
00:01:30.020 00:01:30.030 from at least 300 millimeters away from
00:01:32.510 00:01:32.520 a doorway or any opening to make sure
00:01:35.960 00:01:35.970 there's no white seal
00:01:40.600 00:01:40.610 can't be so high so you make sure that
00:01:45.920 00:01:45.930 you put your seal on correctly when you
00:01:48.080 00:01:48.090 install connection there which is a nice
00:01:56.990 00:01:57.000 nice neat one that comes with ideal
00:01:59.060 00:01:59.070 boilers so yeah let's go look inside
00:02:02.649 00:02:02.659 inside the boiler you can see they say
00:02:05.359 00:02:05.369 service chill actually tells the
00:02:07.880 00:02:07.890 customer the display on these boilers is
00:02:11.350 00:02:11.360 well they're really really good
00:02:13.670 00:02:13.680 that's very very simple to use as well
00:02:15.440 00:02:15.450 for installer we've got a pure level on
00:02:20.990 00:02:21.000 it
00:02:21.410 00:02:21.420 my company details on that what we'll do
00:02:24.830 00:02:24.840 now we'll check case off set set the
00:02:26.990 00:02:27.000 case off we've got two two screws
00:02:31.819 00:02:31.829 underneath so I'm just going to tap
00:02:33.619 00:02:33.629 power off to it first and then do me do
00:02:37.280 00:02:37.290 you checks but just kiss off now as
00:02:40.280 00:02:40.290 always if you're gonna work I'm a gas
00:02:42.319 00:02:42.329 boiler
00:02:43.009 00:02:43.019 you must be Yossef registered so I'm
00:02:46.550 00:02:46.560 just doing I'm doing these two screws
00:02:48.229 00:02:48.239 underneath and then there's just like a
00:02:52.220 00:02:52.230 little clip there and that just lifts
00:02:54.440 00:02:54.450 out set on that side and then the front
00:02:57.050 00:02:57.060 cover lift up lift off now I'm trying to
00:03:04.879 00:03:04.889 do this to one hand there's the boiler
00:03:08.240 00:03:08.250 inside what do I like about the spoiler
00:03:11.710 00:03:11.720 stainless steel heat exchanger for me
00:03:16.099 00:03:16.109 that's what I'm trying look for in
00:03:18.710 00:03:18.720 boilers salt brass inside as well I'm
00:03:24.800 00:03:24.810 going to trim the heating down and we're
00:03:27.740 00:03:27.750 gonna pull this expansion vessel up or
00:03:29.420 00:03:29.430 at least check the expansion vessel and
00:03:32.449 00:03:32.459 then we're going to strip it down as
00:03:33.530 00:03:33.540 well so do that now we just look on
00:03:36.020 00:03:36.030 pressure gauges on one at the moment
00:03:38.199 00:03:38.209 I've put a drain off on bottom here you
00:03:41.659 00:03:41.669 can actually drained from the filling
00:03:43.580 00:03:43.590 loop as well but it's just these on this
00:03:45.979 00:03:45.989 just to drain it from here I'm just
00:03:48.080 00:03:48.090 going to check the pressure out of it
00:03:50.180 00:03:50.190 really I'll do that now see the wires
00:03:53.479 00:03:53.489 coming out is is clean need a little bit
00:03:56.509 00:03:56.519 of chemicals they can just see it's
00:04:01.610 00:04:01.620 absolutely spotless
00:04:03.460 00:04:03.470 this would a fully new central air
00:04:06.040 00:04:06.050 system and all the system is on press
00:04:08.770 00:04:08.780 fit so there's no fluxes and no solder
00:04:11.980 00:04:11.990 that's been added into the system
00:04:17.670 00:04:17.680 pressure gauge is going down when the
00:04:21.400 00:04:21.410 pressure goes down there so now we're
00:04:45.950 00:04:45.960 [Music]
00:04:59.090 00:04:59.100 00:05:04.680 00:05:04.690 here we might find that somewhat
00:05:08.740 00:05:08.750 sticking out boiler I use a foot pump
00:05:14.670 00:05:14.680 you can get electrical ones I did off I
00:05:17.470 00:05:17.480 did have a battery operated one before
00:05:19.710 00:05:19.720 Jeff so my jet I want I want really
00:05:22.630 00:05:22.640 happy well that I've just got like an
00:05:24.610 00:05:24.620 extension piece in there and then
00:05:28.990 00:05:29.000 another little extension owner that's
00:05:32.500 00:05:32.510 why you're coming back says to get into
00:05:34.240 00:05:34.250 boxes and then if we have a look I'm
00:05:36.340 00:05:36.350 here
00:05:44.990 00:05:45.000 the reason you do this with no pressure
00:05:51.270 00:05:51.280 in so if this way if this were all
00:05:52.560 00:05:52.570 connected then you might not be pumping
00:05:55.590 00:05:55.600 the expansion vessel up very well so
00:05:58.920 00:05:58.930 this is how you need to do it so that
00:06:00.510 00:06:00.520 you know you're actually putting air
00:06:02.790 00:06:02.800 into the expansion vessel there so I'm
00:06:06.630 00:06:06.640 going to pump this up a bit more now
00:06:11.040 00:06:11.050 00:06:24.950 00:06:24.960 look on that gauge now is pumped up just
00:06:28.740 00:06:28.750 a little bit lower than one bar I'm
00:06:30.870 00:06:30.880 gonna pump a few more times I'll just
00:06:33.990 00:06:34.000 get it so it's just slightly over one
00:06:36.480 00:06:36.490 bar I'm pumped up to one bar now I'm
00:06:39.510 00:06:39.520 just going to test just gonna test that
00:06:45.500 00:06:45.510 make sure it's not leaking because we
00:06:49.410 00:06:49.420 don't want to be pumping up and then we
00:06:51.120 00:06:51.130 know that that's leaking from shredder
00:06:53.040 00:06:53.050 valve so we know that's not leaking yeah
00:07:05.500 00:07:05.510 to point out on an idea logic or on an
00:07:09.170 00:07:09.180 idealogue this connection as per the
00:07:12.680 00:07:12.690 manufacturer's instructions now needs to
00:07:15.200 00:07:15.210 be a compression and that's if they need
00:07:18.230 00:07:18.240 to do what with bile other can
00:07:19.360 00:07:19.370 disconnect it without it being soldered
00:07:21.550 00:07:21.560 so that's just somewhat just to point
00:07:23.660 00:07:23.670 out I'm going to strip this down now and
00:07:27.200 00:07:27.210 what I've locked inside and we'll
00:07:28.580 00:07:28.590 service it and then we'll go through the
00:07:30.640 00:07:30.650 display as well on the front and the
00:07:35.090 00:07:35.100 display on this is very very interesting
00:07:37.480 00:07:37.490 I've turned the spur off on this I've
00:07:41.810 00:07:41.820 also removed a fuse I'm right next to it
00:07:44.330 00:07:44.340 so no nobody's going to turn it back on
00:07:46.570 00:07:46.580 I've checked the fuse which I already
00:07:50.210 00:07:50.220 know there's a freon fuels because
00:07:52.160 00:07:52.170 obviously I installed this boiler so now
00:07:57.890 00:07:57.900 I'm going to strip this down so loon do
00:08:00.350 00:08:00.360 these nuts on here take leads off
00:08:05.440 00:08:05.450 disconnect says gas off here and we'll
00:08:09.710 00:08:09.720 check this out the flips off the gas and
00:08:13.730 00:08:13.740 I'm just gonna do these now this is a 10
00:08:16.640 00:08:16.650 mil socket for ideal as far these looks
00:08:31.820 00:08:31.830 that already do that now and then we'll
00:08:34.730 00:08:34.740 have a look inside I was getting asked
00:08:36.530 00:08:36.540 what tools are used so I've got a little
00:08:38.930 00:08:38.940 where where is that which I find really
00:08:44.660 00:08:44.670 really good for servicing
00:08:50.090 00:08:50.100 look inside this together sometimes
00:08:55.190 00:08:55.200 these are really quick and easy to
00:08:57.420 00:08:57.430 service to be honest so as I said now
00:09:01.620 00:09:01.630 this is four years old not really that
00:09:07.380 00:09:07.390 bad in there but I'll get me Hoover
00:09:09.600 00:09:09.610 Hoover this out and then I'll get the
00:09:11.579 00:09:11.589 brush and clean it cleanly now I've got
00:09:13.410 00:09:13.420 a filter cordless Hoover it's okay it's
00:09:18.960 00:09:18.970 not amazing but it's it's alright for
00:09:20.850 00:09:20.860 this it's really good for boiler
00:09:23.460 00:09:23.470 servicing to be fair yeah so yeah I'm
00:09:26.699 00:09:26.709 just doing without liberal Charlotte out
00:09:28.530 00:09:28.540 now I've been asked before about the
00:09:32.850 00:09:32.860 sails and lays so obviously on this
00:09:35.010 00:09:35.020 burner you would check this seal and
00:09:37.320 00:09:37.330 I've never had to change one of these
00:09:39.269 00:09:39.279 seals before obviously this is now four
00:09:42.510 00:09:42.520 years old and I've slipped this down
00:09:43.980 00:09:43.990 every year and I'm cleaned it every year
00:09:46.620 00:09:46.630 but this now this seal it won't go back
00:09:49.620 00:09:49.630 in its just popped out so I need a new
00:09:52.530 00:09:52.540 seal I don't actually have one of these
00:09:55.890 00:09:55.900 seals on one stock because I've never
00:09:57.870 00:09:57.880 I've never needed one before so I've
00:10:01.650 00:10:01.660 actually I've just formed the wrap from
00:10:03.570 00:10:03.580 ideal and and believe it or not the rep
00:10:06.600 00:10:06.610 is gonna come out and bring me a seal so
00:10:10.620 00:10:10.630 what we'll do is once he gets here we'll
00:10:13.380 00:10:13.390 continue this video so yeah
00:10:31.019 00:10:31.029 just roll away and father for the Reptar
00:10:35.050 00:10:35.060 come it's gonna give this a really good
00:10:36.639 00:10:36.649 play now so just this I got this I got
00:10:40.689 00:10:40.699 this from
00:10:46.110 00:10:46.120 the camera turn in there
00:10:48.519 00:10:48.529 I want forgot even one as well but you
00:10:51.550 00:10:51.560 can try and get it down these gaps here
00:10:57.809 00:10:57.819 now that's because this is the bit the
00:11:01.900 00:11:01.910 saw gets blocked up funded uh get
00:11:03.819 00:11:03.829 service for a while sometimes you see
00:11:05.710 00:11:05.720 these with a little like hump and
00:11:07.720 00:11:07.730 they're not not on this particular
00:11:09.420 00:11:09.430 boiler to be honest bombs some models
00:11:12.490 00:11:12.500 are boiler and but you just can get
00:11:15.120 00:11:15.130 there's much a line there as clean as
00:11:19.180 00:11:19.190 you can you see inside if you're gonna
00:11:41.170 00:11:41.180 wash the heat exchanger all then why I
00:11:45.100 00:11:45.110 do is I'm Paul does sheet sensing you
00:11:47.590 00:11:47.600 don't want to get water on a board or
00:11:49.660 00:11:49.670 main it any boiler and and then I've got
00:11:52.689 00:11:52.699 these these little MUX here seeking
00:11:55.900 00:11:55.910 direct so you can see that there were a
00:11:58.180 00:11:58.190 little splash of water from there but
00:12:00.910 00:12:00.920 I've give that a really good clean-out
00:12:02.350 00:12:02.360 and wash out you know now it's
00:12:05.199 00:12:05.209 absolutely spotless in there really
00:12:10.000 00:12:10.010 clean some people use a toll lucky and
00:12:16.000 00:12:16.010 they do have a drill like polish these
00:12:18.220 00:12:18.230 up a bit but they're not spotless I'm
00:12:20.620 00:12:20.630 not going to start trying to get the
00:12:25.030 00:12:25.040 disc or enough there's no there's no
00:12:27.519 00:12:27.529 physical muck on there and it's spotless
00:12:29.949 00:12:29.959 through and I've washed it through water
00:12:32.550 00:12:32.560 so know that the the hose on here is not
00:12:36.309 00:12:36.319 blocked
00:12:37.420 00:12:37.430 then I just need to I'm gonna take that
00:12:39.670 00:12:39.680 drop out as well and clean that quad
00:12:47.250 00:12:47.260 just got there got a better one shop I'm
00:12:51.190 00:12:51.200 gonna pop up there tiny bit one shot in
00:12:53.290 00:12:53.300 there
00:12:53.710 00:12:53.720 just different need to be really careful
00:12:57.970 00:12:57.980 all this stuff this is this is acid so
00:13:00.130 00:13:00.140 you don't wanna feel like this make sure
00:13:09.520 00:13:09.530 you use gloves stay well away from that
00:13:24.900 00:13:24.910 just want to just try and clean off a
00:13:28.450 00:13:28.460 little bit just seeing bomb in there you
00:13:34.570 00:13:34.580 wouldn't normally go to our list really
00:13:37.390 00:13:37.400 I just want to I'm waiting for them to
00:13:40.450 00:13:40.460 come so I might as well Matt will do
00:13:42.640 00:13:42.650 this play now look cleaned all up now
00:14:03.600 00:14:03.610 just see there already
00:14:05.440 00:14:05.450 trap it sir it's made a massive
00:14:09.070 00:14:09.080 difference I'm not actually know why I
00:14:10.870 00:14:10.880 don't know why the girl orange so here's
00:14:15.400 00:14:15.410 the home sites happen around you just a
00:14:17.020 00:14:17.030 really really good female
00:14:20.429 00:14:20.439 I've just flipped they come and sit trap
00:14:23.790 00:14:23.800 back in it just clips in and then just
00:14:27.009 00:14:27.019 twists into them logs below now if you
00:14:30.460 00:14:30.470 can just see see them a lot of logs it
00:14:32.590 00:14:32.600 clips in freeware and then you just
00:14:34.900 00:14:34.910 twist it into looks just over really
00:14:39.670 00:14:39.680 quit locking this tool bug just well
00:14:41.759 00:14:41.769 what I'm wearing I've got that side so
00:14:46.090 00:14:46.100 this is the monument it's all bad which
00:14:49.420 00:14:49.430 thinks really good the only thing I've
00:14:51.699 00:14:51.709 all said the one thing it's not going to
00:14:53.679 00:14:53.689 negative but you don't want to be
00:14:56.199 00:14:56.209 putting so much in because it gets too
00:14:57.549 00:14:57.559 heavy but I've got all my stuff in here
00:14:59.590 00:14:59.600 and it's brilliant
00:15:01.540 00:15:01.550 all you stuff there so obviously I've
00:15:03.879 00:15:03.889 got me analyzers I've got some spare
00:15:05.650 00:15:05.660 tubes in there that unzips there and
00:15:10.179 00:15:10.189 then I've got all this is just my
00:15:11.379 00:15:11.389 service kit I've got my cab machine in
00:15:15.639 00:15:15.649 there these men these men at all sets
00:15:21.819 00:15:21.829 and then we're a toolkit just glides in
00:15:24.699 00:15:24.709 there some space there but spanners and
00:15:27.990 00:15:28.000 then they're my leak detection fluid
00:15:33.189 00:15:33.199 goes in there got a little flap up front
00:15:36.400 00:15:36.410 there but if you can see and you get
00:15:39.249 00:15:39.259 your gauge can go in there and I'm the
00:15:41.379 00:15:41.389 easement did you order so be honest and
00:15:45.610 00:15:45.620 then we've got got me lately ticked in
00:15:47.860 00:15:47.870 there and the
00:15:59.290 00:15:59.300 very very grateful to ideal just the
00:16:02.930 00:16:02.940 most urban myth a sale out so obviously
00:16:06.650 00:16:06.660 my customers not gonna be left without
00:16:07.820 00:16:07.830 or what weekend so a big funky old big
00:16:11.360 00:16:11.370 shout out to ideal for that thank you
00:16:12.950 00:16:12.960 very much anybody ideal is watching
00:16:15.700 00:16:15.710 let's get this pullback on till here and
00:16:18.890 00:16:18.900 then we can build this we can build this
00:16:22.420 00:16:22.430 build this back up so on that added a
00:16:28.040 00:16:28.050 little bit of a rip so you just need to
00:16:29.570 00:16:29.580 make sure you put it on that way around
00:16:31.870 00:16:31.880 and that just clicks in so we're just
00:16:41.540 00:16:41.550 going to put burner back in now so
00:16:46.460 00:16:46.470 obviously we put a new seal on this and
00:16:49.370 00:16:49.380 then we're just gonna put those nuts
00:16:50.480 00:16:50.490 back in there so again that's 10 ml 10
00:16:53.930 00:16:53.940 ml not so we've got 10 ml wrap chip that
00:16:56.900 00:16:56.910 we're gonna use
00:17:03.760 00:17:03.770 right back in now so just check your
00:17:06.620 00:17:06.630 o-rings make sure there's no splits or
00:17:08.600 00:17:08.610 tears in them and one thing to point out
00:17:10.699 00:17:10.709 in here well you've got an o-ring there
00:17:12.680 00:17:12.690 as a lock and then obviously this one
00:17:14.689 00:17:14.699 goes in here but these go on top at gas
00:17:17.090 00:17:17.100 valve here just make sure that the
00:17:20.210 00:17:20.220 injector there is back in and if you
00:17:22.850 00:17:22.860 ever change this gas valve as well which
00:17:24.350 00:17:24.360 you're probably never going to need to
00:17:25.730 00:17:25.740 cause it'd be under warranty as long as
00:17:27.530 00:17:27.540 it's been serviced but just make sure
00:17:29.840 00:17:29.850 that that is that injector is backing in
00:17:33.590 00:17:33.600 place and then your ring goes on there
00:17:36.140 00:17:36.150 and then we'll clip this pipe here now
00:17:42.370 00:17:42.380 and then that one's got no ring on there
00:17:44.930 00:17:44.940 that's clear clipping into there now as
00:17:46.730 00:17:46.740 well and then we'll just put the clips
00:17:49.640 00:17:49.650 back on and these clips are different
00:17:53.060 00:17:53.070 size for top and bottom so just make
00:17:54.920 00:17:54.930 sure you go around
00:17:57.900 00:17:57.910 and that says gas back connected so
00:18:01.390 00:18:01.400 containers gas back on now underneath
00:18:03.130 00:18:03.140 because I just turned off well we're
00:18:05.740 00:18:05.750 just gonna pop leads back on now just
00:18:24.940 00:18:24.950 going to connect the hose onto the in
00:18:27.700 00:18:27.710 luck onto the Gus
00:18:29.440 00:18:29.450 so they'll contest the gutter pressures
00:18:32.320 00:18:32.330 not for this interbank more so on
00:18:34.510 00:18:34.520 display if you dance a tremendous player
00:18:37.090 00:18:37.100 you see that's got been marred become
00:18:39.130 00:18:39.140 enter and enter again
00:18:43.060 00:18:43.070 I know a pulse of the public to turn it
00:18:45.640 00:18:45.650 on and off and then you can get the air
00:18:47.770 00:18:47.780 out of the system this is only because I
00:18:51.070 00:18:51.080 obviously have drilling the pilot down
00:18:52.660 00:18:52.670 to pump up the expansion vessel so we've
00:18:59.500 00:18:59.510 got all the air out now so I'm just
00:19:01.480 00:19:01.490 going to take it out of that mud just
00:19:03.640 00:19:03.650 like an exit so we're out of there mud
00:19:06.300 00:19:06.310 and then you scroll down on here
00:19:10.820 00:19:10.830 go into
00:19:13.600 00:19:13.610 commissioning mod service Lord minimum
00:19:17.770 00:19:17.780 rare and then service my maximum rate
00:19:20.290 00:19:20.300 here when we're going to minimum Lord
00:19:23.260 00:19:23.270 what we need to do we need to have a
00:19:25.420 00:19:25.430 call for heat
00:19:26.470 00:19:26.480 so our call for heat and then while do
00:19:29.020 00:19:29.030 in a minute is our clicked I click enter
00:19:32.770 00:19:32.780 or put into service mode on minimum
00:19:34.870 00:19:34.880 first analyzer on I've got me free of
00:19:37.630 00:19:37.640 that weather as well to put it out
00:19:39.870 00:19:39.880 bottle connected the you get children so
00:19:43.360 00:19:43.370 we'll test the in luck as well
00:19:48.080 00:19:48.090 so then the heating up now on the
00:19:51.409 00:19:51.419 display with Creek we turn the clock on
00:19:53.869 00:19:53.879 such as calling for heating now and now
00:19:56.389 00:19:56.399 we're going to put it back into service
00:19:57.649 00:19:57.659 mode on minimum
00:20:08.380 00:20:08.390 and I'll just click enter and then last
00:20:10.690 00:20:10.700 on minimum and then we with to get fun
00:20:14.590 00:20:14.600 correct from reading I'm here and then
00:20:17.950 00:20:17.960 once we've got that we can check on here
00:20:21.400 00:20:21.410 what as readings are
00:20:24.910 00:20:24.920 and then we'll print that out shortly
00:20:26.740 00:20:26.750 and then also under there we've got the
00:20:29.530 00:20:29.540 gas connected so we can see what
00:20:32.200 00:20:32.210 pressure with God
00:20:35.260 00:20:35.270 it's quite high a moment once I fired up
00:20:38.210 00:20:38.220 yeah so
00:20:43.890 00:20:43.900 so that's all novel so we can print that
00:20:46.850 00:20:46.860 00:20:56.520 00:20:56.530 so just pnom now
00:21:00.160 00:21:00.170 so we know that's all
00:21:02.320 00:21:02.330 working with each other and then what
00:21:05.349 00:21:05.359 we'll do now we'll put into high on
00:21:07.749 00:21:07.759 service Lord we'll just let that print
00:21:09.459 00:21:09.469 out first so to put into high you just
00:21:13.180 00:21:13.190 click on exit and then just scroll down
00:21:15.999 00:21:16.009 there so we've got a service mode
00:21:17.859 00:21:17.869 maximum so come enter and again now
00:21:22.419 00:21:22.429 we're waiting for the fan speed to go up
00:21:24.430 00:21:24.440 on there so we're all not to go to
00:21:26.949 00:21:26.959 maximum and then we'll just wait a
00:21:30.519 00:21:30.529 little while just get a chance to settle
00:21:33.369 00:21:33.379 down and then we can see that again in
00:21:35.769 00:21:35.779 that
00:21:37.019 00:21:37.029 unless 2001 there's no pressure loss on
00:21:40.289 00:21:40.299 the system customers close by and the
00:21:42.959 00:21:42.969 gases sized correctly I did I used all
00:21:46.409 00:21:46.419 the spoiler so the installation of this
00:21:49.079 00:21:49.089 is spa so again now that cell down will
00:21:54.599 00:21:54.609 just print out
00:21:57.730 00:21:57.740 and then we've got read another
00:22:01.300 00:22:01.310 and I'm not on that printout salsa
00:22:03.760 00:22:03.770 telling us whilst pressure is doing my
00:22:11.800 00:22:11.810 shirt and there insert text so we took
00:22:18.640 00:22:18.650 this out of here and we pause cap what
00:22:23.140 00:22:23.150 was cap on if I can find my cap rubber
00:22:25.960 00:22:25.970 grommet oh yeah so just be careful not
00:22:29.350 00:22:29.360 to lose that and then we just get
00:22:32.230 00:22:32.240 analyzer and on there now we can test to
00:22:36.790 00:22:36.800 make sure that the flu it's just
00:22:38.320 00:22:38.330 checking the flu
00:22:40.380 00:22:40.390 integrity so making sure there's no
00:22:42.930 00:22:42.940 faulty seals on the flu and then we'll
00:22:48.340 00:22:48.350 go back to here
00:22:50.940 00:22:50.950 00:22:52.900 00:22:52.910 and again we can check it
00:22:57.250 00:22:57.260 00:22:59.190 00:22:59.200 my
00:23:05.740 00:23:05.750 22.9 so we know that my so kid and again
00:23:08.960 00:23:08.970 we can print this out with my mom so we
00:23:12.140 00:23:12.150 can prove that everything's perfect on
00:23:15.560 00:23:15.570 it and then obviously now set the
00:23:19.100 00:23:19.110 analyzer now you think just a double
00:23:22.460 00:23:22.470 check and always knows your is they
00:23:24.140 00:23:24.150 can't put yet you grommet back in and
00:23:26.780 00:23:26.790 the analyzer party's back on that's
00:23:30.740 00:23:30.750 really really fun and then we can just
00:23:35.090 00:23:35.100 check out service mode so we click on
00:23:37.130 00:23:37.140 exit on here and then we're out we're at
00:23:41.090 00:23:41.100 the service mode and then what I'll do
00:23:43.460 00:23:43.470 now is I've got fill this display layer
00:23:45.140 00:23:45.150 and I'll just show you how you reset you
00:23:47.960 00:23:47.970 can reset the service intervals on it
00:23:50.930 00:23:50.940 and stuff like that we'll go for that
00:23:52.340 00:23:52.350 now just before we do all else I'm just
00:23:56.150 00:23:56.160 going to tie in gas back up and then
00:23:58.940 00:23:58.950 what we'll do we will spray the test
00:24:01.400 00:24:01.410 nipple on it to make sure we don't leave
00:24:05.000 00:24:05.010 no gas leaks
00:24:08.750 00:24:08.760 00:24:10.230 00:24:10.240 so we know a soul song okay right so I'm
00:24:13.890 00:24:13.900 just gonna go fruit display now so click
00:24:15.540 00:24:15.550 on enter and as I said as we said just
00:24:19.320 00:24:19.330 our way we are then we've got the
00:24:22.080 00:24:22.090 preheat so we can switch the preheat on
00:24:24.060 00:24:24.070 and off we can do maximum floor
00:24:26.610 00:24:26.620 temperature so if you want it you can
00:24:28.470 00:24:28.480 turn that down and so they can save you
00:24:32.310 00:24:32.320 some money on your gas that's if you've
00:24:34.620 00:24:34.630 got announcer outdoor sensing you but
00:24:36.330 00:24:36.340 you slope fault
00:24:38.160 00:24:38.170 history help top help and fall history
00:24:41.160 00:24:41.170 so you can click into them if you wanted
00:24:42.900 00:24:42.910 to steer the inputs or click it to that
00:24:46.160 00:24:46.170 and that tells us so we've got his water
00:24:49.020 00:24:49.030 pressure 1.2 bar heating these off at
00:24:52.740 00:24:52.750 the minute
00:24:53.240 00:24:53.250 what tells you litres a minute I want em
00:24:56.640 00:24:56.650 picture come out of that step outputs so
00:25:05.490 00:25:05.500 obviously it's all turned off now and
00:25:08.010 00:25:08.020 then if we go down again we've got if
00:25:10.280 00:25:10.290 wrong way service mode minimum service
00:25:15.690 00:25:15.700 mode maximum efficiency levels so like
00:25:19.320 00:25:19.330 you can click into that it gives you
00:25:21.180 00:25:21.190 some information in there how efficient
00:25:23.580 00:25:23.590 is running I don't really know how that
00:25:25.590 00:25:25.600 works if I'm honest too much but frost
00:25:28.020 00:25:28.030 protection reset service time so once
00:25:31.260 00:25:31.270 you've done your service you need to
00:25:32.910 00:25:32.920 reset it so reset click on enter
00:25:38.490 00:25:38.500 and then it's back to reset time is 365
00:25:42.420 00:25:42.430 days come out there and then there's
00:25:46.770 00:25:46.780 some other details its dollar details so
00:25:49.440 00:25:49.450 you can put you installer details in
00:25:51.990 00:25:52.000 there pump modulation you can adjust
00:25:54.210 00:25:54.220 that as well so you can have a maximum
00:25:55.350 00:25:55.360 or minimum so the display and the full
00:25:58.650 00:25:58.660 of the world is absolutely brilliant for
00:26:01.170 00:26:01.180 an installer when you're doing a service
00:26:03.090 00:26:03.100 one thing just to point out is when
00:26:06.420 00:26:06.430 you're doing your service mode you do
00:26:07.890 00:26:07.900 need to have a call for heat so
00:26:10.230 00:26:10.240 sometimes when these come originally you
00:26:12.990 00:26:13.000 get a little a little plug in here so
00:26:16.530 00:26:16.540 you might want to save that plug if you
00:26:18.990 00:26:19.000 didn't want to go in and out of the
00:26:20.460 00:26:20.470 ouster to clock up and down
00:26:22.560 00:26:22.570 or you can turn clock up and down
00:26:24.539 00:26:24.549 whichever so yeah so that as I said the
00:26:27.959 00:26:27.969 display on this is is really good right
00:26:31.319 00:26:31.329 so that's it I hope you found that video
00:26:33.959 00:26:33.969 of some use that's the ideal book and as
00:26:38.009 00:26:38.019 I said with the ideal bug it's an
00:26:39.749 00:26:39.759 amazing boiler if you if you have it
00:26:41.819 00:26:41.829 serviced every year comes with a 10-year
00:26:44.219 00:26:44.229 parts and labor warranty yeah
00:26:47.639 00:26:47.649 thanks for watching
Office location
Engineering company LOTUS®
Russia, Ekaterinburg, Lunacharskogo street, 240/12

Phone: +7 343 216 77 75

E-mail: info@lotus1.ru

Sales phone

Russia: +7 343 216 77 75

WhatsApp: +79122710308