/ News & Press / Video / Demonstration - Opening a Heat Exchanger safely

Demonstration - Opening a Heat Exchanger safely

WEBVTT
Kind: captions
Language: en

00:00:00.000
ah
00:00:06.290 00:00:06.300 right now we take enough for Smallville
00:00:09.839 00:00:09.849 south which is 46 millimeter 1 2 3 4 and
00:00:15.209 00:00:15.219 also taken out to 80 millimeter diagonal
00:00:20.490 00:00:20.500 rods to add up hydraulically installed
00:00:24.960 00:00:24.970 two extra rods back and we're going to
00:00:29.130 00:00:29.140 install the hydraulic cylinder in it
00:00:31.710 00:00:31.720 we're going to open the cylinder up
00:00:35.530 00:00:35.540 so slender will take all the load and
00:00:38.740 00:00:38.750 we're gonna remove the bolts after
00:00:45.450 00:00:45.460 so right now this lenders are opening as
00:00:48.000 00:00:48.010 you can see it on the diagonal two votes
00:00:51.750 00:00:51.760 we're gonna take the load on the
00:00:53.490 00:00:53.500 slender's and my rods are free as you
00:00:57.660 00:00:57.670 can see they are hand moving and I can
00:01:01.020 00:01:01.030 use a wrench after this little bit so my
00:01:04.680 00:01:04.690 dimension is only two millimeters below
00:01:09.570 00:01:09.580 the dimension
00:01:12.760 00:01:12.770 by all the bolts are loose
00:01:19.010 00:01:19.020 yes checking the boats
00:01:26.149 00:01:26.159 and the bottom one is a little tight so
00:01:29.300 00:01:29.310 we can early stat2 and we can air move
00:01:31.639 00:01:31.649 all the boats
00:01:36.469 00:01:36.479 I'm releasing it ran slowly so it's
00:01:40.399 00:01:40.409 closing it traps back
00:01:53.240 00:01:53.250 now the frame plate is coming back along
00:01:55.880 00:01:55.890 with the ramps
00:02:13.809 00:02:13.819 he's checking my hardware is okay
00:02:16.149 00:02:16.159 sitting good
00:02:21.190 00:02:21.200 it's all good
00:02:24.610 00:02:24.620 they're releasing
00:02:28.350 00:02:28.360 hydraulic is removing unit is opened up
00:02:31.380 00:02:31.390 so I can adjust loosen the rods up and
00:02:35.510 00:02:35.520 take these existing tuples in diagonal
00:02:40.170 00:02:40.180 out and remove it out from the unit
00:02:51.010 00:02:51.020 [Music]

Sales phone