/ News & Press / Video / EZ Torque® Heat Exchanger Gaskets from USA Industries

EZ Torque® Heat Exchanger Gaskets from USA Industries

WEBVTT
Kind: captions
Language: en

00:00:01.260
[Music]
00:00:02.470 00:00:02.480 USA industries designed the EZ torque
00:00:05.570 00:00:05.580 gasket to provide a positive seal
00:00:07.550 00:00:07.560 affected by less than half the
00:00:09.200 00:00:09.210 installation torque required for
00:00:10.970 00:00:10.980 traditional flat gaskets the EZ torque
00:00:13.789 00:00:13.799 gasket consists of a serrated metal core
00:00:16.099 00:00:16.109 with a bonded layer of graphite on each
00:00:18.230 00:00:18.240 surface the construction of the EZ
00:00:20.599 00:00:20.609 torque gasket allows for focused and
00:00:22.939 00:00:22.949 distributed forces greatly increasing
00:00:25.400 00:00:25.410 the ability of the gasket to properly
00:00:27.290 00:00:27.300 seal against surface imperfections
00:00:28.839 00:00:28.849 eliminating expensive rima sheeting
00:00:31.070 00:00:31.080 costs as well as requiring significantly
00:00:33.530 00:00:33.540 less torque typical flat gaskets are
00:00:36.410 00:00:36.420 notorious for inconsistent sealing that
00:00:38.810 00:00:38.820 are often the source of unsafe and
00:00:40.490 00:00:40.500 costly leaks
00:00:41.420 00:00:41.430 ez torque gasket ensures that you pass
00:00:44.119 00:00:44.129 leak tests on the first attempt and
00:00:45.979 00:00:45.989 lower the expense of downtime as the
00:00:48.950 00:00:48.960 operator continues to torque the flat
00:00:50.900 00:00:50.910 gasket during installation of the header
00:00:52.790 00:00:52.800 plug the metal hardens which decreases
00:00:55.369 00:00:55.379 and ultimately prevents the gasket from
00:00:57.799 00:00:57.809 yielding and thickness to deform for a
00:00:59.750 00:00:59.760 seal the load stress is caused by this
00:01:02.420 00:01:02.430 over torquing and strain hardening
00:01:03.979 00:01:03.989 phenomenon result in damage and
00:01:06.140 00:01:06.150 deformation to the header box gasket
00:01:08.300 00:01:08.310 surface plug thread galling and thread
00:01:10.730 00:01:10.740 shear within the header box greatly
00:01:13.219 00:01:13.229 reduce unnecessary downtime and
00:01:15.289 00:01:15.299 expensive problems during your next
00:01:17.240 00:01:17.250 project by utilizing the EZ torque
00:01:19.490 00:01:19.500 gasket contact USA industries 24/7 to
00:01:23.810 00:01:23.820 learn more about unbeatable lead times
00:01:25.670 00:01:25.680 and the ability to produce massive
00:01:27.620 00:01:27.630 quantities of gaskets and plugs on a
00:01:29.630 00:01:29.640 short notice

Sales phone