/ News & Press / Video / Heat Exchangers - Liebherr-Aerospace Saline, Inc.

Heat Exchangers - Liebherr-Aerospace Saline, Inc.

WEBVTT
Kind: captions
Language: en

00:00:12.667 --> 00:00:15.501
When we were in the planning stages of this Heat Exchanger Facility
00:00:15.501 --> 00:00:20.000
we did our research to figure out what the best solutions were in the industry for each process.
00:00:20.000 --> 00:00:23.209
By combining all of these best practices, and designing our own solutions
00:00:23.209 --> 00:00:26.959
where no good solution currently existed, we developed a facility that is state of the art.
00:00:26.959 --> 00:00:31.918
We have the on-hand inventory for an outright sale or an advance exchange if needed.
00:00:31.918 --> 00:00:36.751
And, our facility works per the OEM CMM and only uses original parts –
00:00:36.751 --> 00:00:40.751
eliminating DER or PMA approval required by the customer.
00:00:40.751 --> 00:00:46.000
Our Heat Transfer facility can do all of this at market pricing with superior performance.
00:00:46.000 --> 00:00:51.125
The incoming/receiving section is where our techs can assess the unit and the customer needs.
00:00:51.125 --> 00:00:55.292
We can then start the paperwork and document our initial findings on the unit.
00:00:55.292 --> 00:00:58.918
Our chemical processing platform was built with the future in mind.
00:00:58.918 --> 00:01:02.918
Our 16 fully-automated 600-gallon chemical and rinse tanks
00:01:02.918 --> 00:01:07.999
have built in filtration, agitation and ORP adjustments.
00:01:07.999 --> 00:01:10.209
They are user friendly and efficient.
00:01:10.209 --> 00:01:14.626
We also utilize 2 tanks to perform our underwater proof pressure tests.
00:01:14.626 --> 00:01:17.292
To make sure our units meet the highest standards,
00:01:17.292 --> 00:01:20.751
our final test setup is designed to accurately read flows
00:01:20.751 --> 00:01:24.918
and pressures of a unit to ensure a long lasting, quality product.
00:01:24.918 --> 00:01:28.375
Our machine shop is utilized for both the disassembly of products before repair
00:01:28.375 --> 00:01:31.000
as well as the final machining before release to service.
00:01:31.000 --> 00:01:34.334
To speed up our capability development we decided to purchase a 3D printer
00:01:34.334 --> 00:01:38.000
primarily for the development of V-band clamps for low pressure applications.
00:01:38.000 --> 00:01:41.250
It didn’t take long for us to figure out that there were many more ways to utilize this printer,
00:01:41.250 --> 00:01:43.626
and have since printed cradles for parts during welding,
00:01:43.626 --> 00:01:45.792
adapters for internal varnish application
00:01:45.792 --> 00:01:47.876
and supports for testing instruments.
00:01:47.876 --> 00:01:51.667
Through the use of CMT robotic welding and non-contact dimensional verification,
00:01:51.667 --> 00:01:53.834
and the best manual TIG welders in the industry,
00:01:53.834 --> 00:01:57.000
we’re able to produce the best finished product you will find in this market.
00:01:57.000 --> 00:02:01.000
After welding and dimensional verification, every unit undergoes dye- penetrant inspection
00:02:01.000 --> 00:02:04.292
to verify the weld quality is compliant with the OEM established criteria.
00:02:04.292 --> 00:02:08.792
Making sure our community stays safe, we built a Waste Water Treatment Plant
00:02:08.792 --> 00:02:12.626
to remove heavy metals and chemicals from our waste stream.
00:02:12.626 --> 00:02:19.125
This system also allows us to be more self-sufficient which cuts down on costs for our customers.
00:02:19.125 --> 00:02:21.959
Our facility employs skilled people using the latest technologies
00:02:21.959 --> 00:02:26.417
to ensure a cost-effective, quality product gets to our customer on time.

Sales phone