How to install a flue for a Greenstar boiler

WEBVTT
Kind: captions
Language: en

00:00:02.940
[Music]
00:00:07.730 00:00:07.740 all Wooster green style boilers have
00:00:10.070 00:00:10.080 facility to fit the flu externally
00:00:11.869 00:00:11.879 without the need to work outside on a
00:00:13.609 00:00:13.619 scaffold this simply involves pushing
00:00:15.470 00:00:15.480 the flu through the wall and pulling it
00:00:17.120 00:00:17.130 back to the wall to create an airtight
00:00:18.320 00:00:18.330 seal this reduces the need again for the
00:00:21.109 00:00:21.119 work in the Heights regulations I'm now
00:00:23.450 00:00:23.460 going to demonstrate how easy it is to
00:00:24.950 00:00:24.960 perform this simple routine
00:00:28.600 00:00:28.610 00:00:32.160 00:00:32.170 first part the job is to measure from
00:00:34.660 00:00:34.670 the outer wall to the centerline of the
00:00:36.340 00:00:36.350 flow this will then determine how far we
00:00:43.299 00:00:43.309 need to extend the flew out to get the
00:00:44.740 00:00:44.750 collar to see it against the wall now
00:00:49.329 00:00:49.339 we've got the dimension we require we
00:00:51.250 00:00:51.260 get the flu extend it out to maximum
00:00:53.979 00:00:53.989 distance taking our tape measure close
00:00:58.180 00:00:58.190 the flue back up until we get the center
00:01:00.729 00:01:00.739 of the flue in line with our maximum
00:01:02.590 00:01:02.600 measurement required I now fix the two
00:01:07.420 00:01:07.430 halves that flew together I've installed
00:01:10.330 00:01:10.340 the inner sealing ring for the flue I'm
00:01:13.840 00:01:13.850 now gonna apply this aluminum tape which
00:01:15.670 00:01:15.680 helps to seal the flue up and make it
00:01:17.350 00:01:17.360 easy to slide the flu through the cavity
00:01:18.999 00:01:19.009 of the wall I'm installing it once we
00:01:23.230 00:01:23.240 take the flow what we're going to do his
00:01:24.940 00:01:24.950 story's outer ring here on to the edge
00:01:27.190 00:01:27.200 of the flue there was a look at the top
00:01:29.469 00:01:29.479 that needs to locate in that notch here
00:01:32.820 00:01:32.830 what we need to make sure is that the
00:01:35.290 00:01:35.300 the ridge here in this flue seal lines
00:01:37.719 00:01:37.729 up with this Ridge here in the actual
00:01:39.790 00:01:39.800 flow when they're lined up correctly is
00:01:43.359 00:01:43.369 perfectly positioned to reseal the flue
00:01:45.490 00:01:45.500 to the building when installing the flew
00:01:50.350 00:01:50.360 from inside it's important to make sure
00:01:51.729 00:01:51.739 the hole you drill is 150 millimeters
00:01:58.980 00:01:58.990 00:02:08.680 00:02:08.690 when installing on a single brick wall
00:02:10.940 00:02:10.950 cutting the flue down isn't always
00:02:12.440 00:02:12.450 necessary the flue simply slides apart
00:02:16.960 00:02:16.970 we then remove these two screws here and
00:02:19.730 00:02:19.740 here I removed this section once we
00:02:25.250 00:02:25.260 remove the screws simply take out this
00:02:27.740 00:02:27.750 section here and replace it with the end
00:02:31.550 00:02:31.560 turret section we then put the screws
00:02:36.199 00:02:36.209 back in holding this piece to the turret
00:02:39.250 00:02:39.260 00:02:43.330 00:02:43.340 if you want to flew sideways we are
00:02:45.490 00:02:45.500 going through a very large wall and this
00:02:47.350 00:02:47.360 short float isn't long enough we also do
00:02:50.020 00:02:50.030 another option on flues this flew here
00:02:52.720 00:02:52.730 is still telescopic and goes from five
00:02:55.119 00:02:55.129 hundred and seventy millimeters of de
00:02:56.979 00:02:56.989 maximum of seven hundred and ninety
00:02:58.600 00:02:58.610 millimeters which ever flew option you
00:03:03.940 00:03:03.950 use all three of these variants can be
00:03:05.920 00:03:05.930 used internally pushing the flew ring
00:03:08.380 00:03:08.390 through the wall without a need to use
00:03:10.360 00:03:10.370 it scaffolding
Office location
Engineering company LOTUS®
Russia, Ekaterinburg, Lunacharskogo street, 240/12

Phone: +7 343 216 77 75

E-mail: info@lotus1.ru

Sales phone

Russia: +7 343 216 77 75

WhatsApp: +79122710308