HVAC Evaporator Coil Cleaning

WEBVTT
Kind: captions
Language: en

00:00:00.060
all right I just got through pulling
00:00:01.850 00:00:01.860 this evaporator so what I'm going to do
00:00:05.030 00:00:05.040 is kind of give you a short overview
00:00:07.579 00:00:07.589 about how to if you're at home and you
00:00:11.060 00:00:11.070 want to try to clean your own coil in
00:00:12.620 00:00:12.630 place how you can do it the easiest way
00:00:27.800 00:00:27.810 or the best way not the easiest way but
00:00:30.529 00:00:30.539 the best way to clean an evaporator coil
00:00:34.100 00:00:34.110 like this one right here is to actually
00:00:35.690 00:00:35.700 pull it and clean it if you're so
00:00:39.080 00:00:39.090 inclined to do it at your house
00:00:47.030 00:00:47.040 you see screw right there screw right
00:00:51.120 00:00:51.130 there
00:00:51.600 00:00:51.610 screw right there screw right there and
00:00:54.260 00:00:54.270 the screws at the bottom you can take
00:00:56.880 00:00:56.890 those out and this little Center
00:00:58.610 00:00:58.620 triangle sheet metal piece comes out but
00:01:01.440 00:01:01.450 what you got to be careful of is these
00:01:03.030 00:01:03.040 little feeder tubes I had a call on a
00:01:07.490 00:01:07.500 Saturday night a few weeks ago a guy had
00:01:11.550 00:01:11.560 tried to pull this thing apart while it
00:01:14.280 00:01:14.290 was in place and he actually rubbed
00:01:17.280 00:01:17.290 against one of these little feeder tubes
00:01:18.719 00:01:18.729 and ruptured it and he called me in a
00:01:22.020 00:01:22.030 frantic saying help I ruptured a tube
00:01:26.609 00:01:26.619 and now I will do free on everywhere so
00:01:32.280 00:01:32.290 it's always best I try not to ever take
00:01:35.160 00:01:35.170 this sheet metal piece off I'm a
00:01:37.350 00:01:37.360 professional for you know sometimes I'm
00:01:40.530 00:01:40.540 a professional but I try never to take
00:01:44.219 00:01:44.229 that off just because I don't want the
00:01:45.810 00:01:45.820 liability of rupture one of these tubes
00:01:48.900 00:01:48.910 or causing a leak myself I always
00:01:52.410 00:01:52.420 suggest that the coil just gets replaced
00:01:54.300 00:01:54.310 instead getting cleaned because once you
00:01:57.690 00:01:57.700 pull it and clean it you do take a
00:01:59.609 00:01:59.619 chance on cause an egg freon leak now
00:02:03.169 00:02:03.179 another reason you don't want to just
00:02:05.309 00:02:05.319 clean it in place is if you see all this
00:02:09.210 00:02:09.220 dirt right here
00:02:58.789 00:02:58.799 now the reason you don't want to just
00:03:00.960 00:03:00.970 clean it in place if you see all this
00:03:04.890 00:03:04.900 dirt right here that's actually the dirt
00:03:08.129 00:03:08.139 that's got sucked inside of the fence if
00:03:10.679 00:03:10.689 you just try to clean the inside of it
00:03:14.039 00:03:14.049 you'll never get all of the stuff from
00:03:18.000 00:03:18.010 inside the fence now they sell stuff at
00:03:20.190 00:03:20.200 Home Depot that you can use and the
00:03:22.170 00:03:22.180 problem with it is it foams up and what
00:03:24.720 00:03:24.730 happens is it drop step inside the
00:03:26.369 00:03:26.379 blower housing and then you take a
00:03:29.339 00:03:29.349 chance on shorting the motor out so you
00:03:31.649 00:03:31.659 know you can try to clean it in place if
00:03:33.449 00:03:33.459 you want to but the problem is is you're
00:03:35.039 00:03:35.049 not going to get it clean enough to
00:03:36.899 00:03:36.909 where it's working properly and in it
00:03:39.000 00:03:39.010 but guys been out and he just put freon
00:03:41.670 00:03:41.680 in it and he didn't check super heat
00:03:44.180 00:03:44.190 then you have a situation where you use
00:03:47.280 00:03:47.290 it's probably overcharged like this unit
00:03:49.469 00:03:49.479 right here is probably going to be
00:03:51.089 00:03:51.099 overcharged so they did have a guy come
00:03:53.099 00:03:53.109 out and check the freon and he added a
00:03:55.439 00:03:55.449 little so it's actually going to
00:03:57.599 00:03:57.609 probably be overcharged when we get done
00:04:00.080 00:04:00.090 you know and in a unit too much freon is
00:04:05.069 00:04:05.079 just as bad if not enough anyway I'm
00:04:07.800 00:04:07.810 going to show you the inside here what's
00:04:10.469 00:04:10.479 the thing over you see
00:04:17.039 00:04:17.049 and it's always best we try to clean
00:04:19.770 00:04:19.780 these things when they're dry if you're
00:04:21.300 00:04:21.310 going to try to do it yourself it's
00:04:25.830 00:04:25.840 always best to try to do it when it's
00:04:27.390 00:04:27.400 dry because when this dirt gets a dirt
00:04:30.659 00:04:30.669 or when it gets wet it's like a it's
00:04:33.839 00:04:33.849 like mud say got all that hair now I've
00:04:39.659 00:04:39.669 got a little thin column I can use try
00:04:46.529 00:04:46.539 to pull some of the stuff out of here
00:04:53.390 00:04:53.400 but as you see it's not the easiest
00:04:56.129 00:04:56.139 thing to do and I'm right here on top of
00:04:57.719 00:04:57.729 it so imagine how long it would take you
00:05:00.899 00:05:00.909 if you were trying to do this in place
00:05:03.860 00:05:03.870 so it's just better sometimes just to
00:05:06.930 00:05:06.940 call somebody
00:05:07.740 00:05:07.750 have them pull it and clean it and you
00:05:10.980 00:05:10.990 know that way they can check the charge
00:05:12.330 00:05:12.340 making sure they use superheating
00:05:14.249 00:05:14.259 subcooling
00:05:15.740 00:05:15.750 you know that way you get a good running
00:05:20.100 00:05:20.110 system after the fact look at that
00:05:25.490 00:05:25.500 anyway so I'm gonna get this thing
00:05:28.110 00:05:28.120 sprayed off and get it all cleaned up
00:05:34.249 00:05:34.259 see how it's just pulling off and in
00:05:36.659 00:05:36.669 sheets and like I said I'm standing
00:05:43.980 00:05:43.990 right on top of this and I'm not trying
00:05:45.510 00:05:45.520 to reach through the center of the coal
00:05:46.980 00:05:46.990 to try to pull this stuff off so you not
00:05:51.659 00:05:51.669 just pulling off there
00:05:55.129 00:05:55.139 and it is a dirty job I don't know if
00:05:57.629 00:05:57.639 you can see all that dust coming through
00:05:59.129 00:05:59.139 but you know if you're standing in front
00:06:01.350 00:06:01.360 of it trying to pull it off you know you
00:06:03.839 00:06:03.849 can breathe breathing all this stuff in
00:06:05.870 00:06:05.880 so like is that it's just better not to
00:06:08.999 00:06:09.009 try to do it yourself and just call
00:06:10.439 00:06:10.449 somebody that can actually pump and pump
00:06:13.890 00:06:13.900 the unit down pull it out take it
00:06:17.580 00:06:17.590 outside wash it
00:06:31.480 00:06:31.490 all right now got my water hose out you
00:06:34.310 00:06:34.320 can see that what is taking in St Kilda
00:06:39.980 00:06:39.990 stuff off and here in the second I'll
00:06:43.040 00:06:43.050 show what it's like to shoot from the
00:06:45.230 00:06:45.240 other side that's where I'm saying you
00:06:47.300 00:06:47.310 cannot get these things
00:06:50.170 00:06:50.180 clean in place very well
00:06:52.440 00:06:52.450 this wire is set in the furnace to pass
00:06:54.810 00:06:54.820 and pulling them clean
00:06:58.180 00:06:58.190 so now that you see that side right
00:07:00.550 00:07:00.560 there let's see what happens now we're
00:07:04.780 00:07:04.790 playing from the outside in and as you
00:07:08.590 00:07:08.600 see you can't get that stuff off it
00:07:13.540 00:07:13.550 so what I'm doing is I'm is I'm washing
00:07:16.719 00:07:16.729 it off getting all the dirt off from the
00:07:19.719 00:07:19.729 inside well he's doing it from the
00:07:21.670 00:07:21.680 outside record seconds but
00:07:25.820 00:07:25.830 I'm going to finish doing what I'm doing
00:07:28.550 00:07:28.560 with the water hose from the inside and
00:07:30.379 00:07:30.389 I'll take my coil cleaner and we'll
00:07:33.350 00:07:33.360 shoot it from the outside let it foam up
00:07:35.540 00:07:35.550 and we'll get this sucker clean all
00:07:42.170 00:07:42.180 right so you got my coal sprayed out and
00:07:45.650 00:07:45.660 see all the stuff that's coming out of
00:07:46.850 00:07:46.860 it
00:07:47.390 00:07:47.400 only stuff so as you can see you can't
00:07:51.980 00:07:51.990 really get it clean in a place you have
00:07:54.830 00:07:54.840 to all this stuff is just bubbling up
00:07:57.200 00:07:57.210 from the inside of the coal so you know
00:08:00.050 00:08:00.060 you can't can't get it clean from just
00:08:03.550 00:08:03.560 clean it from the inside
00:08:06.460 00:08:06.470 all right so we got the coal clean in
00:08:09.170 00:08:09.180 place there's some stuff laying there
00:08:11.600 00:08:11.610 and then some of stuff laying on the
00:08:14.059 00:08:14.069 ground there but we cleaned it now we're
00:08:17.480 00:08:17.490 getting ready to take it inside and wash
00:08:20.960 00:08:20.970 it yeah it's pretty nasty in it and
00:08:25.180 00:08:25.190 that's like I said that's that's when
00:08:27.680 00:08:27.690 it's wet and I mean it's just you can
00:08:31.189 00:08:31.199 see you look like spinach finish out of
00:08:35.240 00:08:35.250 the candy I'm not eating there you go so
00:08:40.250 00:08:40.260 it looks like almost a new coal now
00:08:44.420 00:08:44.430 let's go put it in alright so the coal
00:08:46.310 00:08:46.320 is in its final resting place for
00:08:48.490 00:08:48.500 también anyway till it develops a leak
00:08:52.090 00:08:52.100 then it will be changed getting ready to
00:08:56.480 00:08:56.490 put the cover back on and then once I
00:09:00.350 00:09:00.360 get to cover back in place
00:09:01.699 00:09:01.709 then I'll swedge this and then I don't
00:09:04.790 00:09:04.800 have a 5/16 wedge or so what I'm going
00:09:08.060 00:09:08.070 to do is I'm going to take a piece of
00:09:09.139 00:09:09.149 3/8 wedge it on both sides slip that
00:09:12.440 00:09:12.450 over like a little coupling and then
00:09:16.130 00:09:16.140 we'll get it put back in place get it
00:09:18.829 00:09:18.839 braised up get it back and pulled on it
00:09:21.290 00:09:21.300 and get this thing started up alright so
00:09:28.190 00:09:28.200 I've got my lines all swedge DUP
00:09:31.560 00:09:31.570 thanks to the hill morphs wager as you
00:09:36.850 00:09:36.860 see I I made my little cup one out of
00:09:39.010 00:09:39.020 three eight and we get it out Braves up
00:09:41.860 00:09:41.870 and uh be ready to pull a vacuum got my
00:09:45.910 00:09:45.920 nightstand running
00:09:48.939 00:09:48.949 you're ready to pull back
Office location
Engineering company LOTUS®
Russia, Ekaterinburg, Lunacharskogo street, 240/12

Phone: +7 343 216 77 75

E-mail: info@lotus1.ru

Sales phone

Russia: +7 343 216 77 75

WhatsApp: +79122710308