Perrin Oil Cooler Install [Frs_Brz] 'Better Oil Temps'

WEBVTT
Kind: captions
Language: en

00:00:00.140
[Music]
00:00:03.430 00:00:03.440 what is up YouTube Johnny be here again
00:00:06.200 00:00:06.210 today and we're going to be working on
00:00:08.270 00:00:08.280 my FRS a long time ago when I did this
00:00:12.350 00:00:12.360 Trento badge in salt I decided that I
00:00:15.049 00:00:15.059 wanted to delete the the mesh part of
00:00:17.779 00:00:17.789 the grille I didn't really like the way
00:00:19.370 00:00:19.380 it looked and ever since then there's
00:00:21.859 00:00:21.869 been a huge gap here with nothing to
00:00:25.130 00:00:25.140 fill it so just kind of looks weird but
00:00:28.300 00:00:28.310 now I got something it's going to be a
00:00:32.359 00:00:32.369 nice addition to the front end and it's
00:00:34.430 00:00:34.440 going to fill up the space and just make
00:00:35.840 00:00:35.850 it look so much better so we're going to
00:00:38.959 00:00:38.969 go ahead and install that in this video
00:00:42.069 00:00:42.079 alright so the first thing we're going
00:00:44.360 00:00:44.370 to do before we can add them into the
00:00:46.760 00:00:46.770 front is we're going to need to remove
00:00:48.470 00:00:48.480 the front bumper so we can have easier
00:00:50.119 00:00:50.129 access to everything so let's go ahead
00:00:53.900 00:00:53.910 and take it off
00:00:58.180 00:00:58.190 all right so now that we have the bumper
00:01:01.460 00:01:01.470 off I needed to go ahead and remove this
00:01:05.180 00:01:05.190 porn because it's in the way because
00:01:07.850 00:01:07.860 we're going to be installing something
00:01:08.930 00:01:08.940 that covers basically this whole area
00:01:13.120 00:01:13.130 look at this like this instrument but
00:01:21.260 00:01:21.270 we're going to be installing one of
00:01:22.730 00:01:22.740 these this is literally going to cover
00:01:24.950 00:01:24.960 the whole front but the reason I'm going
00:01:26.990 00:01:27.000 to install this is what I even go ahead
00:01:28.430 00:01:28.440 and install the full turbo kit because I
00:01:31.100 00:01:31.110 need to install something that goes in
00:01:33.560 00:01:33.570 front of it or behind it and I need to
00:01:34.999 00:01:35.009 figure out where I'm going to put it to
00:01:36.620 00:01:36.630 see where it's going to fit so let's go
00:01:39.800 00:01:39.810 ahead and install the intercooler which
00:01:42.830 00:01:42.840 at this moment without a turbo is going
00:01:45.560 00:01:45.570 to be an intercooler because everybody's
00:01:47.870 00:01:47.880 going to think I'm boosted and I'm
00:01:49.010 00:01:49.020 really not so I'm just going to slide
00:01:51.800 00:01:51.810 this in
00:01:59.500 00:01:59.510 yeah you want we want to make sure that
00:02:02.260 00:02:02.270 the top hangers line up with these holes
00:02:03.700 00:02:03.710 in the reinforcement bar slide the pool
00:02:09.600 00:02:09.610 [Applause]
00:02:12.300 00:02:12.310 make sure it's all lining up first
00:02:14.830 00:02:14.840 obviously we go all the way through now
00:02:21.130 00:02:21.140 the other one
00:02:26.790 00:02:26.800 we're going to put some locks washer nut
00:02:30.640 00:02:30.650 so they have like a little plastic trim
00:02:32.560 00:02:32.570 in here so they don't come loose we're
00:02:35.110 00:02:35.120 going to put them on through the back so
00:02:50.230 00:02:50.240 this is what we're actually going to be
00:02:52.030 00:02:52.040 installing for this video it is the
00:02:54.640 00:02:54.650 parent oil cooler for the FRS BRZ and
00:02:57.760 00:02:57.770 it's piece it's piece around with
00:03:00.790 00:03:00.800 various parts but they sell that as a
00:03:03.400 00:03:03.410 parent kit because they're the ones that
00:03:05.410 00:03:05.420 piece it all together and then they make
00:03:06.880 00:03:06.890 nice little adaptors and faces and
00:03:09.460 00:03:09.470 things like that so this is going to be
00:03:11.710 00:03:11.720 the actual oil cooler you can see there
00:03:14.590 00:03:14.600 that's a brand that RAB not really sure
00:03:17.350 00:03:17.360 how you pronounce that if i pronounced
00:03:19.120 00:03:19.130 it correctly but it needs to be one of
00:03:21.790 00:03:21.800 the highest quality ones in the market
00:03:23.080 00:03:23.090 it is a bit smaller but it's still so
00:03:29.229 00:03:29.239 really good oil cooler and then here
00:03:32.440 00:03:32.450 we're gonna this is our sandwich adapter
00:03:34.530 00:03:34.540 so this is where we're actually going to
00:03:36.550 00:03:36.560 be eating the oil cooler and which is
00:03:38.620 00:03:38.630 going to be the return line and
00:03:39.790 00:03:39.800 everything it actually comes equipped
00:03:41.860 00:03:41.870 with a thermostat so that way it only
00:03:45.250 00:03:45.260 opens up when it what it means when it
00:03:47.170 00:03:47.180 gets up to temperature and we actually
00:03:48.880 00:03:48.890 need to cool down the oil because you
00:03:50.860 00:03:50.870 don't want to have supercooled oil the
00:03:52.390 00:03:52.400 oil needs to be at a certain temperature
00:03:54.370 00:03:54.380 for everything to operate correctly so
00:03:56.380 00:03:56.390 this is a big plus when looking into
00:03:59.530 00:03:59.540 doing an oil cooler you want to make
00:04:01.900 00:04:01.910 sure it has a thermostat in it it's
00:04:03.580 00:04:03.590 going to help out a lot
00:04:05.180 00:04:05.190 this right here is the parent spacer so
00:04:10.070 00:04:10.080 it's going to space this and they're
00:04:12.860 00:04:12.870 going to go directly on top like that
00:04:14.270 00:04:14.280 just so that the holders can clear the
00:04:17.300 00:04:17.310 little shroud that's that's on our OEM
00:04:19.130 00:04:19.140 filter area and then this is going to
00:04:21.620 00:04:21.630 bolt it all down together so pretty
00:04:25.130 00:04:25.140 simple concept all of the kids are exact
00:04:29.090 00:04:29.100 same concept obviously some parts are
00:04:31.280 00:04:31.290 different here in there but this I got a
00:04:34.160 00:04:34.170 really good deal on the parents so I
00:04:35.600 00:04:35.610 went ahead and one with this even though
00:04:36.980 00:04:36.990 it's one of the more expensive ones so I
00:04:39.080 00:04:39.090 was glad to go with this it was actually
00:04:41.540 00:04:41.550 a subscriber hooked me up with this
00:04:43.640 00:04:43.650 which is awesome of him I actually got
00:04:45.980 00:04:45.990 it for about half price of what their
00:04:47.570 00:04:47.580 works so that's why I decided to go with
00:04:50.300 00:04:50.310 the parens is because it's a really high
00:04:52.280 00:04:52.290 quality especially if you look at the
00:04:54.230 00:04:54.240 hoses they're really high quality so
00:04:56.840 00:04:56.850 it's going to be a cool kid to install
00:04:58.940 00:04:58.950 and I definitely need this since I'm
00:05:01.790 00:05:01.800 going to be going booth here in the
00:05:02.990 00:05:03.000 future
00:05:03.350 00:05:03.360 it's one of the best supporting upgrades
00:05:06.410 00:05:06.420 you could do when you're boosted so
00:05:09.710 00:05:09.720 let's go ahead and start installing it
00:05:10.850 00:05:10.860 okay so the first thing we're going to
00:05:12.230 00:05:12.240 do is go ahead and remove the oil filter
00:05:14.260 00:05:14.270 yeah make sure you wait a little while
00:05:17.270 00:05:17.280 just to make sure it's not hot and then
00:05:20.120 00:05:20.130 go ahead and remove it now go
00:05:24.050 00:05:24.060 so here is our original area for the
00:05:28.200 00:05:28.210 filter so now what we're going to go
00:05:30.540 00:05:30.550 ahead and do if we're going to get the
00:05:33.240 00:05:33.250 spacer right here and we're going to put
00:05:35.970 00:05:35.980 the things down first make sure you try
00:05:39.660 00:05:39.670 to Center it a little bit because I need
00:05:41.730 00:05:41.740 to be perfect and then next we're going
00:05:44.160 00:05:44.170 to need this sandwich adapter go ahead
00:05:48.870 00:05:48.880 and put it here you want to angle it to
00:05:53.370 00:05:53.380 where it's not in the way now we're
00:05:55.530 00:05:55.540 going to go ahead and install this which
00:05:56.880 00:05:56.890 is going to hold it all together now
00:06:02.790 00:06:02.800 we're going to go ahead and torque it
00:06:03.960 00:06:03.970 down you want to make sure you tighten
00:06:10.800 00:06:10.810 it down but you don't want it to be too
00:06:12.270 00:06:12.280 tight kind of hard to get it the socket
00:06:16.530 00:06:16.540 I'm using is a 1 and 1/16 inch the times
00:06:21.510 00:06:21.520 is down there we go you don't want too
00:06:25.530 00:06:25.540 much pressure on it I looked everywhere
00:06:27.630 00:06:27.640 and there is no specific torque rating
00:06:29.760 00:06:29.770 to tighten this down but obviously when
00:06:32.100 00:06:32.110 you do an oil filter you don't tighten
00:06:33.390 00:06:33.400 down too much same thing with this just
00:06:35.730 00:06:35.740 want to turn out putting it down to
00:06:37.740 00:06:37.750 where it's nice and snug and it's not
00:06:39.480 00:06:39.490 moving around like right here still
00:06:40.650 00:06:40.660 moving so I'm gonna have to turn it down
00:06:41.970 00:06:41.980 a little bit more
00:06:44.510 00:06:44.520 00:06:47.670 00:06:47.680 these are the hoses that came with the
00:06:49.870 00:06:49.880 kit as you guys can see they look pretty
00:06:51.820 00:06:51.830 professional really high-quality hoses
00:06:53.980 00:06:53.990 and they have some nice fittings on the
00:06:56.020 00:06:56.030 end of them that are already on there
00:06:59.590 00:06:59.600 from when you get them you can notice
00:07:02.110 00:07:02.120 one of them is actually shorter than the
00:07:04.000 00:07:04.010 other don't be alarmed
00:07:05.740 00:07:05.750 they obviously go to like different
00:07:07.510 00:07:07.520 sections of the oil cooler so it's how
00:07:10.540 00:07:10.550 you see it here it's how they're going
00:07:11.770 00:07:11.780 to be bolting on onto the cooler so I'm
00:07:16.540 00:07:16.550 going to show you guys how to go ahead
00:07:17.680 00:07:17.690 and put these on now there they are just
00:07:24.900 00:07:24.910 like that they go run underneath the
00:07:27.010 00:07:27.020 headlight now we have to line them up
00:07:31.230 00:07:31.240 the shorter one is going to go on this
00:07:33.700 00:07:33.710 side then the longer ones will go on
00:07:39.760 00:07:39.770 this side make sure you angle them
00:07:42.370 00:07:42.380 properly so you can put them on there
00:07:45.900 00:07:45.910 00:07:48.630 00:07:48.640 before I tighten them down I'm going to
00:07:50.890 00:07:50.900 go ahead and connect them on the cooler
00:07:53.260 00:07:53.270 also okay so now we're going to take the
00:07:55.600 00:07:55.610 oil cooler and we're going to go ahead
00:07:57.940 00:07:57.950 and place it on these little mounting
00:08:00.330 00:08:00.340 bracket and we're going to go ahead and
00:08:03.159 00:08:03.169 bolt them down okay so now that you
00:08:07.840 00:08:07.850 figured out where you want to install it
00:08:09.219 00:08:09.229 or you can go ahead and also install it
00:08:11.920 00:08:11.930 and the holes that are already made in
00:08:14.080 00:08:14.090 this little bottom piece of plastic if
00:08:16.990 00:08:17.000 you want to set it up in a different
00:08:18.460 00:08:18.470 place you could always grow holes and
00:08:20.740 00:08:20.750 make sure to just line them up and since
00:08:22.629 00:08:22.639 these have some play in them it's fairly
00:08:24.850 00:08:24.860 easy to make the holes and you can
00:08:27.279 00:08:27.289 adjust them make them fit the bolt that
00:08:29.080 00:08:29.090 it comes with comes with a big washer so
00:08:33.310 00:08:33.320 that way you can just put it into the
00:08:34.930 00:08:34.940 bottom and it'll hold to the plastic
00:08:37.690 00:08:37.700 with no problem
00:08:38.649 00:08:38.659 let's go ahead and put this on and I've
00:08:41.110 00:08:41.120 already put the other one on so I just
00:08:42.430 00:08:42.440 want to show you guys franksen after you
00:08:46.449 00:08:46.459 got it all the way through it's just a
00:08:48.370 00:08:48.380 matter of
00:08:49.520 00:08:49.530 trying to get it aligned and then
00:08:52.310 00:08:52.320 bolting it down now that you have it all
00:08:56.480 00:08:56.490 in place you can go ahead and sign every
00:08:58.490 00:08:58.500 single bolt down all right so now that
00:09:07.580 00:09:07.590 we have it mounted where we want it
00:09:09.350 00:09:09.360 we're going to go ahead and take off
00:09:10.940 00:09:10.950 these little covers that come with the
00:09:14.360 00:09:14.370 cooler and then now we can go ahead and
00:09:23.590 00:09:23.600 click these up so as you guys can see
00:09:25.970 00:09:25.980 there they line up pretty good just want
00:09:29.540 00:09:29.550 to go ahead and put them to a place
00:09:31.400 00:09:31.410 where they're not causing too much
00:09:33.560 00:09:33.570 tension and it's pretty simple they have
00:09:37.340 00:09:37.350 a little o-ring so they just have closed
00:09:40.720 00:09:40.730 bolt on
00:09:42.520 00:09:42.530 00:09:51.810 00:09:51.820 now we're going to go ahead and sign
00:09:53.560 00:09:53.570 down the these a and fittings they go on
00:09:56.560 00:09:56.570 the thermostat housing these are a one
00:09:59.769 00:09:59.779 inch the ones that were on the oil
00:10:01.930 00:10:01.940 cooler we're one inch and 1/16 I don't
00:10:05.949 00:10:05.959 know what is equation two in millimeters
00:10:07.420 00:10:07.430 but those are the only wrenches I have
00:10:09.310 00:10:09.320 that actually fit
00:10:10.420 00:10:10.430 okay so provided with this case are
00:10:13.360 00:10:13.370 these zip ties which are meant for you
00:10:15.699 00:10:15.709 to zip tie the hoses together because
00:10:17.170 00:10:17.180 you don't want them moving around if
00:10:19.600 00:10:19.610 there's too much movement with these
00:10:20.769 00:10:20.779 hoses and they're rubbing next to a
00:10:23.439 00:10:23.449 metal or something it could make it
00:10:25.210 00:10:25.220 literally just straight through them
00:10:27.160 00:10:27.170 with the vibrations so you want to make
00:10:29.350 00:10:29.360 sure you zip tie them to avoid any sort
00:10:31.120 00:10:31.130 of vibration and keep them nice and
00:10:33.819 00:10:33.829 together you know nice and snug wherever
00:10:36.730 00:10:36.740 you're going to have them we can just go
00:10:40.540 00:10:40.550 ahead and apply as much as you want
00:10:41.949 00:10:41.959 there's actually a ton of the tighten
00:10:43.930 00:10:43.940 and I'm going to use all of them but I'm
00:10:46.810 00:10:46.820 going to use a decent amount as always
00:10:50.500 00:10:50.510 you want to make sure that this is going
00:10:51.850 00:10:51.860 to clear your bumper too but you can see
00:10:54.069 00:10:54.079 there's some wiggle room the hoses still
00:10:56.290 00:10:56.300 move and if they're leaning on your
00:10:59.019 00:10:59.029 bumper they're not really going to get
00:11:00.220 00:11:00.230 alright so since we installed the oil
00:11:02.889 00:11:02.899 cooler we're going to need an extra
00:11:04.180 00:11:04.190 quart of oil luckily I have some extra
00:11:07.540 00:11:07.550 left over let's go ahead and put it in
00:11:11.590 00:11:11.600 00:11:14.600 00:11:14.610 alright guys it's going to be it for the
00:11:16.619 00:11:16.629 video I hope to help you out it wasn't
00:11:18.569 00:11:18.579 really a how-to but it was just more of
00:11:20.639 00:11:20.649 me just installing this with a little
00:11:22.949 00:11:22.959 bit of extra showing detail obviously
00:11:24.960 00:11:24.970 there's a lot of different ways that you
00:11:26.340 00:11:26.350 can do this don't judge me too hard
00:11:29.999 00:11:30.009 obviously this wasn't a super
00:11:32.160 00:11:32.170 professional install but we got the job
00:11:34.710 00:11:34.720 done with the tools that we had and now
00:11:38.210 00:11:38.220 what you have to do is turn on the car
00:11:41.280 00:11:41.290 and run it for a little while and make
00:11:43.920 00:11:43.930 sure you look at all the lines make sure
00:11:45.989 00:11:45.999 none of them are leaking some of them
00:11:47.790 00:11:47.800 are leaking we might need to change or
00:11:49.739 00:11:49.749 rings or obviously if you have a kid
00:11:51.540 00:11:51.550 that's brand new you can actually just
00:11:54.090 00:11:54.100 go ahead and sign it down a little bit
00:11:55.230 00:11:55.240 more you just want to make sure that you
00:11:56.939 00:11:56.949 have zero oil leaks because if you have
00:11:58.829 00:11:58.839 any oil leaks and you don't notice them
00:12:00.629 00:12:00.639 your car engine will explode without oil
00:12:04.019 00:12:04.029 so that's a top tech tip if you can say
00:12:08.970 00:12:08.980 it's going to be it for the video hope
00:12:11.489 00:12:11.499 you guys enjoyed and as always you guys
00:12:14.009 00:12:14.019 have a great day
00:12:15.870 00:12:15.880
Office location
Engineering company LOTUS®
Russia, Ekaterinburg, Lunacharskogo street, 240/12

Phone: +7 343 216 77 75

E-mail: info@lotus1.ru

Sales phone

Russia: +7 343 216 77 75

WhatsApp: +79122710308