00:00:08.670 after the plates are correctly installed 00:00:11.16000:00:11.170 in the unit the for longer bolts should 00:00:13.83000:00:13.840 be placed into the places provided at 1 00:00:16.17000:00:16.180 2 3 & 4 only tighten the bolts by hand 00:00:20.90900:00:20.919 as much as possible then tighten the 00:00:23.82000:00:23.830 bolts with a wrench in the proper 00:00:25.29000:00:25.300 sequence as shown in Figure 26 a of the 00:00:28.38000:00:28.390 installation manual install the 00:00:32.24900:00:32.259 remaining bolts in the places provided 00:00:34.43000:00:34.440 tighten the bolts uniformly so that the 00:00:37.41000:00:37.420 movable frame is always parallel with 00:00:39.60000:00:39.610 the fixed frame within one quarter of an 00:00:41.70000:00:41.710 inch the unit should be tightened to the 00:00:45.29900:00:45.309 same plate pack dimension that was 00:00:47.03900:00:47.049 received from the factory usually the 00:00:49.61900:00:49.629 average of a max and amen the dimension 00:00:55.71000:00:55.720 should be checked using a metal tape 00:00:57.39000:00:57.400 such as being shown and the dimension 00:01:00.14900:01:00.159 should be uniform at all bolt locations 00:01:02.71900:01:02.729 the unit is now ready to be placed back 00:01:05.58000:01:05.590 into service using the proper startup 00:01:07.80000:01:07.810 procedure after the unit is confirmed to 00:01:10.67900:01:10.689 be operating satisfactorily the shroud 00:01:13.13900:01:13.149 should be replaced if provided the 00:01:15.87000:01:15.880 shroud is provided primarily to protect 00:01:17.99900:01:18.009 the unit from damage from foreign 00:01:19.70900:01:19.719 objects or debris and for personnel 00:01:22.05000:01:22.060 protection
Office location
Engineering company LOTUS®
Russia, Ekaterinburg, Lunacharskogo street, 240/12